Description
Brand Name: Dusco.E
Model Number: MB-102 830 points Solderless Bread board
Application: For Arduino Module kit Raspberry Pi 3
Operating Temperature: Standard
Supply Voltage: 3.3V 5V
Dissipation Power: Low Power
Package: DIP
MB102 Breadboard For MB-102 Protoboard PCB Board BreadBoard 830 Point Solderless Universal Prototype Board
$3.96
Brand Name: Dusco.E
Condition: New
Type: Voltage Regulator
Model Number: MB-102 830 points Solderless Bread board
Application: For Arduino Module kit Raspberry Pi 3
Operating Temperature: Standard
Supply Voltage: 3.3V 5V
Dissipation Power: Low Power
Package: DIP
is_customized: Yes
6868 in stock
Additional information
| Weight | 3.5274 oz |
|---|---|
| Dimensions | 5.9055 × 3.9370 × 1.1811 in |
| Brand Name | Dusco.E |
| Condition | New |
| Operating Temperature | Standard |
| Type | Voltage Regulator |
| Supply Voltage | 3.3V 5V |
| is_customized | Yes |
| Package | DIP |
| Model Number | MB-102 830 points Solderless Bread board |
| Dissipation Power | Low Power |
| Application | For Arduino Module kit Raspberry Pi 3 |
Only logged in customers who have purchased this product may leave a review.
Related products
-
RGBW LED 18X3W Mini Par with DMX512 control for Stage Lighting (12 pack) by Zita Lighting (One Carton)
$396.36Add to cart- Ultra bright slim Par with 18x 3-Watt TRI LEDs (3-in-1 RGB)
- Great for performance stages where traditional par cans emit a lot of heat onto performers
- Low profile case design
- 7 DMX Channel modes: 1, 2, 3, 4, 5, 6 or 7 channel modes
- 6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode
- Smooth RGB color mixing (fast or slow color change operation)
- TRI LED (3-in-1) projects no RGB shadows
- 32 built-in Color Macros
- Color strobe effect
- Electronic Dimming: 0 – 100%
- Beam angle: 40-degree
- Fan cooled
- Linkable via 3-pin XLR cable (In/Out)
- 4-button LED DMX display on rear panel
- Dual bracket system allows fixture to be hung or set on the ground
- Safety hook on rear panel
- Includes gel frame for optional diffusion filters
- Run all night No duty cycle
- Long Life LEDs (50,000 hrs.)
- Power Draw: 56W max
- Multi-voltage operation: AC 100V-240V 50/60Hz
Color: Black Size: 18*18*10CM
This is a significantly better fixture than the American DJ flat pars found in most clubs.
These have the best cost to value ratio of any fixture available. The price listed is for a DOZEN fixtures. -
HQ Ethix S5 5040 5inch 3 Blade Prop 5X4X3 Light Grey Poly Carbonate Propeller for FPV Drone Racing
$35.68Add to cartDescription：
- Propeller diameter: 5 inches
- Pitch : 4.3
- Blades : 3
- Material: PC
- Weight : 3.8g/pcs
- Center thickness: 7mm
- Shaft: 5mm
- Mating ring : none
- color：one set include 4pcs/2pair Light Grey propellers
Package included:- 5sets CW CCW propeller
-
HAKRC BLHeli_32 Bit 35A ESC for FPV Racing Drone 2-5S, Built-in LED, Dshot1200 and Multishot Compatible
$20.98Add to cartHAKRC BLHeli_32 Bit 35A 2-5S ESC Built-in LED Support Dshot1200 Multishot for FPV RC Drone
Specification:
Brand name: HAKRC
Item name: 35A ESC built-in LED
MCU: STM32F051
Firmware: BLHeli_32 bit
Con. current: 35A
Size: 26x13x5mm
Weight: 7g
Input voltage: 2-5 cell liPo
PCB: 3OZ copper, Gold-plated
Built-in LED, switchable color (red, green, blue, yellow, white, magenta, blue-green)Features:
-Support 500HZ PWM, Oneshot125, Oneshot42, Multishot, Dshot150/300/600/1200.
-With prompt tone, can determine drone's position by the ESC prompt tone. Players also can choose their favorite BGM as the power start-up tone.
-Support 3D mode and automatic motor timing.
-More function settings, Support CleanFlight, BetaFlight settings.
Reviews
There are no reviews yet.